Why is the brush on Dyson dc33 not spinning?
If the brushbar spins fine by hand and fails to spin, the belt may have slipped or snapped. It’s pretty easy to change the clutch or replace the clutch belt. 1) Remove the soleplate by turning the light grey plastic screws with a flatblade screwdriver or a coin at a quarter of a turn anti clockwise.
How do I clean my Dyson brush head?
Clean the Soft roller cleaner head
- Clean the Soft roller cleaner head.
- Pull end cap away from the Brush bar.
- Rotate the end cap to unlock and remove.
- Wash the Soft roller cleaner head.
- Allow the Brush bar to dry for 24hrs.
- Reattach the end cap to the large Brush bar.
- Refit the Soft roller cleaner head.
Is there a reset button on the Dyson?
Dyson vacuums do not have a reset button you can push to solve all the problems, but there are a couple of things you can do. Usually, disassembling the vacuum is a must to get to the source of the issue.
Does the brush on a Dyson spin?
The brush bar on your vacuum performs a key role in its cleaning performance. The rotary brush in the cleaner head of your Dyson V7 spins at high speeds and helps to beat and dislodge the dirt out of your carpets. When the agitator brush no longer spins eSpares is here to help!
Where is the brush bar located on a Dyson dc33?
On some Dyson models the belt can be released from the motor spindle, but on this DC33 it’s housed inside the clutch assembly. Rather than going through the trouble of removing the clutch assembly, we are going to use a bit of brute force to pull the brush bar out from underneath the belt.
Can you change the clutch belt on a Dyson dc33?
Below you’ll find my complete Dyson DC33 clutch belt replacement instructions and also where to get your hands on spare parts. Changing the belts on the DC07 and DC14 are quite similar. The downside is that they usually need to be fixed by an authorised Dyson repair engineer.
Can you replace the brush roller on a dc33?
While you’re taking your DC33, DC07 or DC14 apart, why not service and replace the brush roller as well. You can buy them for less than $20 and you’ll really notice the difference when vacuuming your carpets. You might also need to replace the short piece of hose attached to the cleaning head, if it has got broken or clogged.
Why does my Dyson dc33 have a burning smell?
Have you recently noticed a burning smell coming from your Dyson DC33 and then the brush roll stops working? This could be caused by the clutch belt burning out and breaking. I broke mine when I tried to vacuum over the tassels on an area rug in my living room.