BookRiff

If you don’t like to read, you haven’t found the right book

What transmission fluid goes in a 48re?

48re Transmission Fluid Type & Specs The 48re takes ATF+4 transmission fluid and has a 14.5 – 16.5 quart dry fill capacity.

What kind of transmission fluid does a Dodge 3500 diesel take?

Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.

What kind of transmission fluid does a 2004 Dodge 2500 take?

ATF+4 fluid
FRAM Chrysler ATF+4 fluid is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying Chrysler ATF+4, ATF+3 or ATF+2 Type Fluids.

What kind of transmission fluid does a Dodge Ram use?

The transmission fluid that You use in Your 2017 Ram 1500 depends on which transmission it has. If it has the 6-speed automatic transmission only use ATF+4 automatic transmission fluid. If the truck has the 8-speed automatic transmission You should only use Mopar ZF 8 and 9 speed automatic transmission fluid.

How many quarts of fluid does a 48RE take?

How many quarts of transmission fluid does a 48RE take?

Transmission: Chrysler 48RE
Max Input Torque: 560 – 570 lb-ft (Chrysler strength designation “8”)
Weight: ~248 lbs
ATF Type/Spec: ATF+4 automatic transmission fluid
Fluid Capacity: 14.5 – 16.5 dry fill capacity, approx 4 qts service refill capacity

How much transmission fluid do I need 48RE?

5-7 quarts if just drop pan and change filter.

How much oil does a 48RE transmission hold?

Who makes Aisin transmission fluid?

Aisin Seiki
Aisin automatic transmissions are manufactured by Aisin Seiki and Aisin AW, formerly known as Aisin-Warner, and which was established in 1969 as a joint venture between Aisin Seiki and BorgWarner.

How much fluid does a 48RE hold?

What kind of transmission fluid does a 2004 Dodge Dakota take?

Valvoline Synthetic Transmission Fluid ATF+4 1 Quart.

What kind of transmission fluid does a 2005 Dodge Cummins take?

For Manual Transmission: NV4500 GL-4 All TEMPS 75W-85

Notes: Must be a synthetic oil
Capacity: NV4500 8 pints
Torque: 25-35 ft/lbs (Manual Transmission Drain Plug) 25-35 ft/lbs (Manual Transmission Fill Plug)

How many Litres does a 48RE hold?

8 L (4. 0 qts. )

How much fluid does a 48RE Transmission take?

48re Transmission Fluid Type & Specs The 48re takes ATF+4 transmission fluid and has a 14.5 – 16.5 quart dry fill capacity. When dropping the transmission pan to perform a standard drain and fill transmission fluid change, you can expect to replace around anywhere from 5-7 quarts of fluid assuming the stock transmission pan is being used.

When did the 48RE Transmission come out for Dodge Ram Trucks?

Due to its design, the 48re transmission is found heavy duty 3rd generation 2500 and 3500 Dodge Ram trucks from 2003-2007.

How much dry fill does a Cummins 48RE take?

While the 48re was capable of holding about 570 ft lbs of input torque, the transmission quickly became outdated due to the increased power capabilities of the 07+ Cummins that produced over 600 ft lbs of torque from the factory. The 48re takes ATF+4 transmission fluid and has a 14.5 – 16.5 quart dry fill capacity.

What is the torque rating of a 48RE Transmission?

48RE Transmission Guide & Information by Transmission Cooler Guide Based on the A618, the 48re is an electronically governed, ECU controlled four-speed automatic transmission that is a stronger version of its predecessor, the 47re. The 48re has a torque rating of about 550-570 ft lbs, and Chrysler gives it a strength rating of 8.