What does a wet kit do?
Wet kits (also known as wetline kits) are installed on trucks to operate dump trailers, lowboys, live bottom trailers or other specialty applications. A wet kit consists of hydraulic hoses and fittings, reservoirs/tanks, filters, control valves, pumps and PTOs.
How does a 2 line wet kit work?
A 2-line wet kit, or hydraulic system, is best used in low-usage applications. It consists of its air lines, a pressure hose and a suction hose. The more stress this system experiences, the greater the chances of it breaking down.
What is a semi wet kit?
Wet Kits (or wetline kits) are kits put into trucks or semi-trucks that have PTO (Power Take Off). Many different accessories are installed on trucks, like booms or cranes, and the kits’ hydraulic pump is activated by the truck’s Power Take Off. The accessories need the hydraulic pump to operate.
Do belly dumps need a wet kit?
They have air controlled doors on the bottom that do not require hydraulics or a wet kit.
How much weight does a wet kit add?
the whole thing added about 300 lbs.
What kind of oil do you use in a wet kit?
The trans will use synthetic 50w trans oil, around 30 pints give or take. The wet kit doesn’t need anything special, you could repurpose the tractor stuff, or just buy a pail of a plain antiwear hydraulic fluid, it’s pretty cheap.
What is a wet PTO?
Wet Kits (or wetline kits) are kits put into trucks or semi-trucks that have PTO (Power Take Off). Once the hydraulic fluid gets into the cylinders, the PTO can raise the load or execute any of the other operations that you may desire.
What is a glider kit?
A glider kit is a tractor chassis with a frame, front axle, interior and exterior cab, and brakes (see Figure 1). It becomes a glider vehicle when an engine, transmission, and rear axle are added. Engines are often salvaged from earlier model year vehicles, remanufactured, and installed in glider kits.
How much does a wet kit cost for a semi truck?
The whole set up should run about $8500.
How many yards does a belly dump hold?
Belly dump trailers average 24 cubic yards of hauling capacity and have an open top for fast loading. To unload, the trailer is equipped with a hydraulic gate at the bottom, dumping the full trailer fast or to spread large amounts of loose materials, such as gravel or fill dirt, gradually over a particular area.
What can a 50 gallon wetline kit be used for?
The wetline kits can be used for a variety of different applications including Dump Trailers and Utility Trailers that require hydraulic power. Buyers 50 Gallon Steel Tank Wetline Kit is clockwise rotation with a direct mount 46 GPM cast iron pump/valve combination with bracket. Ships ‘Truck Freight’ and is subject to delivery service limitations.
How big is the pump on a 37 gallon wetline kit?
Buyers 37 Gallon Wetline Kit is counterclockwise rotation with a 18 GPM pump. It is designed for to operate a live/walking floor. Ships ‘Truck Freight’ and is subject to delivery service limitations. (Click Truck for details) Buyers 37 Gallon Wetline Kit is counterclockwise rotation with a 24 GPM pump.
What do you need to know about hydraulic wetline kits?
Buyers Products Hydraulic Wetline Kits, or Wet Kits, are designed for the purpose of adding hydraulic power to an application. The wetline kits come in a variety of different sizes and outputs but the general contents are very similar.