## How many watts does an Interfire amp use?

900 watts Amplifier (T-270)

### How many amps does my amplifier need?

A typical car amplifier requires anywhere from 10-30 amps. (You can check how much amperage you need by looking at the fuses usually located close to the inputs on your amplifier.)

#### How many amps does a 1500 watt amplifier draw?

12.17 Amps

Watts To Amps Table (At 120V)

Watts: | Amps (at 120V): |
---|---|

1300 Watts to amps | 10.83 Amps |

1400 Watts to amps | 11.67 Amps |

1500 Watts to amps | 12.17 Amps |

1800 Watts to amps | 15.00 Amps |

**How many amps does a 1000 watt amp draw at 12V?**

If the amplifier uses a 12V supply and puts out 1000WRMS, it requires 83 Amps. There are two other things to consider. If 50% efficiency is assumed, you have 166 Amps.

**How many watts is 2.4 amps?**

The higher power (2.4amps or 2.4A, 12watts or 12W) chargers are often required by modern phones and tablets in order to charge the device. Lesser powered USB chargers (1A or 5W) have been the standard for many years but they are only sufficient for charging smaller mobile devices.

## What size circuit breaker do I need for a 1500 watt inverter?

Recommended Inverter Cable, Breaker & Fuse Sizing

Inverter Voltage | Continuous Watts | Circuit Breaker (DC Amps) |
---|---|---|

24V | 1000 | 100 |

1500 | 110 | |

2400 | 175 | |

2500 | 175 |

### How many watts can a 3 amp fuse take?

700 watts

Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red). For example: 3A Fuse – Table lamp, standard lamp, television, video, computer, mixer, blender, fridge, freezer, power drill, jig saw, soldering iron.

#### How many amps does a 1500W inverter draw?

Therefore, a 1500W inverter with a 500 Watt load would be 50 (25) Amps, not 150 (75) Amps. The same inverter with a 1200 Watt load would draw 120 (60) Amps.

**How many amps does a 1500 watt amp draw?**

**How many amps is 1500 watts 120 volts?**

12.5 amps

A Sample Circuit Calculation Using the W ÷ V = A variation of Ohm’s law, you can calculate that 1,500 watts ÷ 120 volts = 12.5 amps.

## What’s the difference between 1A and 2.4 A?

If you plug a 2A device into a 1A charger, you will only get 1A. The device will charge more slowly (1/2 speed roughly) but everything will be fine. see less It is perfectly safe to plug a device that draws 1A into the 2A port and vice versa. So if you plug a 1A device into a 2A charger, it will still only draw 1A.

### Which is the best series of interfire amplifiers?

Interfire designed the G series amplifiers specifically for the audio enthusiast needing the most power for the money. The G series amplifiers provide the absolute most bang for the buck. These amps have features only found in the more expensive amplifiers. Your right choice for power!

#### How big is the interfire GD 1200 amplifier?

At only 20 and 12 inches long, the GD-3000 & GD-2000 gives you 2200W and 1200W RMS continuous. Measuring just over 9 inches, the GD-1200 delivers 700W RMS continuously. The GD series amplifiers feature a remote controllable bass boost via the included bass boost remote controller.

**What do you need to know about interfire?**

These are just some of the additions to please many enthusiasts on their quest for the cleanest quality sounds. Interfire is dedicated to all the SPL competitors, audiophiles, cruisers, racers and all music lovers out on the open road enjoying music the way It’s originally meant to be heard; Loud & Clear.