How do you program a outdoor woods timer?
Setting the Program – After clock is set press the HOUR button to the time you want the timer to activate, push PROGRAM button to set auto-on-time. Set the End Time – while “E” is flashing push the HOUR button to the OFF time, push PROGRAM button to set auto shut-off time (around daily departure)
How do you program a woods heavy duty timer?
To Program the Timer: Press the PROG button once to display the first ON/OFF setting “1 ON -:–“. Press the MINUTE and HOUR buttons as necessary to set the ON time you want. To change from AM to PM toggle 12 times. Press the DAY button as necessary to choose the day or group of days you want for the time setting.
How do you charge a woods digital timer?
For further questions about Woods Digital Timers contact them directly at 800-561-4321. Woods 50015 Instructions Charge the Battery: Plug the timer into wall outlet for 10 minutes to charge internal battery. Note: You can then unplug the timer from the wall outlet and comfortably hold it in your hand to program the timer.
What are the wires on the Woods outdoor light timer?
The timer has 4 wires which are black (hot), red (lead), green (ground) and white (neutral). I know that the black wire needs to be connected to the black wires in the box. I also know that the green wire is the ground wire which goes to the ground screw in the box.
Why does my timer not go on outside?
The ON light on the face of the timer lights up when the ON button in pushed but the lights don’t go on outside. Obviously the load (red) wire is not connected to the correct wire in the box. Please help. I’ve tried every variation of color connections and still don’t have it working. Thank you.
How do you set a countdown on a digital timer?
Countdown Setting: Press the PROG button (hold the button down to scroll) and cycle thru all 20 settings until you reach the countdown setting “d ON —-” or “d OFF —-“. Press the HOUR and MINUTE button (s) to set the countdown time. Press the CLOCK button, then press and hold the RCL-CD button for 3-5 seconds to activate the countdown function.