How do I reset my Whirlpool stove?

Reset power to the product:

1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
2. Power unit up by turning on the circuit breaker(s).
3. Start a bake cycle.
4. Monitor the oven for one (1) minute to ensure the error code does not display again.
5. Verify oven operation.

What does f2e1 mean on a stove?

The F2 E1 error code (see images below) means the key tail (ribbon cable for the touchpad) is unplugged or damaged. The tech sheet advises us to check the wiring and connections, and if this does not make the error go away, it then suggests that you replace the keypad.

Why is my stove beeping F2E0?

This error code means that some key is stuck on the oven user interface. If this error occurs, you need to replace the oven electronic control board.

How do I stop my oven from F2?

If the F2 error code has frozen on the oven after shutting down, then unplug the oven for 30 seconds. Plug the oven back in and see if the error code appears again. At times glitches will occur and the error code will randomly appear.

How do you clear a Whirlpool oven code?

Plug the oven power cord back in or turn ON circuit breaker. Press CANCEL on the display. If fault code comes back after 1 minute then replace the keypad. If F2 E0 persists then replace the electronic oven control.

How do you unlock the control panel on a Whirlpool stove?

Press and hold on to the lock for 3 seconds to lock the control panel. The light above the lock will turn on. Press and hold LOCK for 3 seconds to open the control panel.

How do I fix error code f2e1?

F2-E1 – Touch Pad Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the ‘cancel’ function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

What does F2 on a Whirlpool oven mean?

F2 – Oven Temperature Is Too High – Check for welded contacts on bake and broil relays. If present, replace control board (clock). For SELF CLEAN models, check door lock operation. Check sensor, sensor harness, and the sensor harness connection at sensor and oven control.

How do I stop my Whirlpool oven from beeping?

The volume is preset at high, but can be changed to low.

1. To Change: Press and hold the DELAY START TIME pad for 5.
2. To Turn Tones Off/On:
3. To Turn Tones Off/On:
4. To Change:
5. Press TIMER SET.
6. Press TIMER SET or START/ENTER.
7. Press TIMER OFF anytime to cancel the Timer and/or stop.
8. Control Lock.

How do I fix F2E0?

Possible Solutions

1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
2. Power unit up by turning on the circuit breaker(s).
3. Monitor the oven for one (1) minute to ensure the error code does not display again.
4. Verify oven operation.

How do I fix the F2 code on my Whirlpool oven?

F2-E1 – Touch Pad (Keypad) Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the ‘cancel’ function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

What does it mean when oven says F2?

In this case, the F2 error code indicates that the oven temperature is too high. The oven control board (clock) is responsible for measuring the resistance of the sensor circuit. It does not measure the actual temperature inside the oven.

What does F2 mean on a whirlpool oven?

The first step that you need to take is learning what the error means. Each error code is associated with a different problem. In this case, the F2 error code indicates that the oven temperature is too high. Now, this does not necessarily mean that the temperature inside the oven really is too high.

What does the f2e0 error code on my Stove mean?

The F2E0 error code means a “Shorted keypad (also called touch pad)”. Here are a couple of things that you can try. 1. Check keypad connector for firm connection (keypad connects to control board). 2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch).

What does F2 E0 mean on a kitchen aid?

So F2 E0 means that you have a stuck key as you know. Unfortunately this usually means that your touchpad has shorted. You can try to turn the circuit breaker off for 60 seconds to see if the electronics will reset. Then heat up the touchpad with a hair dryer and try to rub your thumb over the different buttons to see if it will reset.

Why is my Whirlpool oven reading a false temperature?

The oven control board (clock) is responsible for measuring the resistance of the sensor circuit. It does not measure the actual temperature inside the oven. So, if there is a fault with this part of the appliance, it can result in false readings. Take a look at the bake and broil relays of the oven.