How do I remove the battery from my IBM ThinkPad?

1. Turn off the IBM ThinkPad.
2. Turn over the computer.
3. Slide the battery release latch to unlock the battery.
4. Loosen the screws securing the service panels to the base of the computer.
5. Find the backup battery, located next to the RAM and partially hidden beneath the case cover.

How do you disconnect an internal battery?

To disable the built-in battery, do the following:

1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Turn on your computer.
3. Select Config ➙ Power.
4. Select Disable built-in battery and press Enter.
5. Select Yes in the Setup Confirmation window.
6. automatically.

How do I remove the battery from my Lenovo?

how to remove lenovo laptop battery

1. Turn off your laptop and disconnect the adaptor.
2. Release the latch or attached device that hold your battery that hold the battery in place.
3. Slide the old battery out of its compartment.
4. Take the replacement battery out of the box.
5. Slide it into the notch.

What happens if CMOS battery is removed?

Removing the CMOS battery will allow your computer to run however, you will lose the date and time settings, the computer will boot with default BIOS settings or you will have to choose the drive that the OS is installed every time you start your computer.

Where is my CMOS battery?

Find the CMOS battery, which is located on the right side of the motherboard.

How do you remove a motherboard battery?

Slide your finger under one edge of the battery and gently pry it up. On some motherboards, the battery will have a small retaining clip on one end. You do not need to bend the clip; simply pull up from the opposite end. If the battery has a metallic tab holding it in, look for a plastic lock on the side of the socket.