What is the Bluetooth PIN for a dual stereo?
The device name is “Dual Media Player” The Bluetooth passcode is “1234” Note: The head unit can be in any mode of operation when pairing is performed.
How do you connect Bluetooth to dual radio?
- To pair a Bluetooth enabled mobile phone to your head unit, change to Bluetooth mode.
- Press and hold on the head unit for 5 seconds, until “PAIRING” is displayed, the.
- Complete the pairing from the Bluetooth menu of your mobile device by searching.
How do I find my Bluetooth radio PIN?
Go into the Bluetooth menu on your cell phone to find the passcode for your cell phone. The Bluetooth menu for your phone is typically located under the “Settings” menu. In the Settings menu, there should be an option to “Get code” or something comparable, which would allow you to find the code for your phone.
How do I reset the Bluetooth code on a dual radio?
The reset button is located behind the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes. Press DISP momentarily to save the selected time.
Why does my dual radio say no signal?
If it says “no signal” it’s obviously turning on, but it doesn’t think it has any input signal, so either you need to send it a signal, it’s not wired correctly, or it’s broken.
How do I reset my dual media player Bluetooth?
Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located on the front panel. With the unit on, press DISP to display clock time. Press and hold DISP until the hours begins to flash, then release.
How do I reset my dual radio?
Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located behind the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes.
How do I reset my Bluetooth pairing code?
Turn off Bluetooth, then Go to Settings > Applications > All > Bluetooth Share and tap “Force Stop,” then “Clear Cache,” then “Clear Data . If the device was ever paired or a pairing ever failed, it may have stored those credentials regardless of success. This should give you a fresh chance at it.
How do I get my Bluetooth in pairing mode?
Step 1: Pair a Bluetooth accessory
- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh.
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
What is the passcode or password when pairing with another Bluetooth device?
Use the code 0000 when pairing with another Bluetooth® device. The passcode may appear as Pass key, PIN code, PIN number, or Password depending on the Bluetooth device used. Note: You can’t pair the device with a Bluetooth device that uses a different passcode.
Do you have to have Bluetooth on before pairing?
Ensure that Bluetooth is activated on your device before beginning the pairing process. The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device.
How do I remove a device from Bluetooth pairing?
In iOS settings, you can remove a device by tapping on its name and then Forget this Device. In Android settings, tap on a device’s name, then Unpair. After removing a device, start at step 1 on this list. You can also reset Bluetooth on devices that can pair to more than one device.
Are there any exceptions to the Bluetooth rule?
The exceptions are gadgets that use a low-energy version called Bluetooth Smart, which works on a different protocol than older, or “Classic” Bluetooth devices. Bluetooth Smart devices are not backward compatible and won’t recognize (or pair with) older devices that support Classic Bluetooth.