How do I turn off the Control Lock on my Whirlpool washer?
Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
What does control locked mean on a Whirlpool washer?
When activated, the Control Lock feature on Front Load Washers can prevent selections from being made. After a cycle has begun, the controls can be locked or unlocked. Children can’t accidentally start the washer by touching the pads.
How do I reset the control panel on my Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
Why does my washer say control locked?
The Control Lock feature on Front Load Washers can prevent any selections from being made when activated. The controls can be locked or unlocked after a cycle has started.
How do I clear the LOC on my Whirlpool washer?
If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.
Where is the control panel on a Whirlpool washer?
Whirlpool washing machine control panels are located on the top of the machine. The control panel must be opened to remove the lid of the washing machine, as well as the replace elements such as the washing machine timer. The control panel is easily accessed by removing two screws that hold the panel in place.
What is Control Lock on washer?
The Control Lock feature on Front Load Washers can prevent any selections from being made when activated. The controls can be locked or unlocked after a cycle has started. To lock or unlock the washer controls: Press and hold the LOCK button for 3 seconds. A sound is made to indicate the lock/unlock status.
How do I unlock my Whirlpool front load washer?
Hold down the “Control Lock” button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
How do you unlock the control on Whirlpool duet washers?
Pressing the power button cancels the “Fan Dry” option and unlocks the door. Press the “Drain and Spin” button on the washer’s control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock.
How do you unlock a Whirlpool dishwasher?
Press “Heated Dry.”. Hold the button for four seconds or until the “Control Lock” light goes out. The control panel is now unlocked and will operate normally.
How can I unlock door to Whirlpool duet washer?
Pull down on the bottom panel and pull it away from the washer. Reach through the open panel and up to the door lock. Find the release ring below the locking mechanism. Pull down on the ring to unlock the door.
Where is the reset button for the Whirlpool?
How to Reset Ice Maker on a Whirlpool Gold Refrigerator. To reset the ice maker on this unit, find the ice tray and remove it. After the removal, you should see a bright RED reset button on the bottom of the ice maker. Push this button and hold it for 10 seconds.