How do you vacuum narrow spaces?

Don’t buy additional vacuum equipment if your attachments are too big. Instead, grab a straw — preferably one of those giant straws from a fast-food chain — and insert part of it into the smallest attachment you have. Tape it in place, and you’ll be able to suck up dirt and dust in the tiniest of spaces.

How do you vacuum hard-to-reach places?

To clean this hard-to-reach spot, invest in a thin microfiber duster that can slide underneath appliances. For a DIY fix, try wrapping a microfiber cloth around the end of a yardstick or broom and secure it with a rubber band. Slide the yardstick under the appliance to collect all of the dust.

How do you vacuum corners?

The Right Way to Vacuum – 5 Steps You Might Be Missing

1. Use the crevice attachment (if you have one) on your vacuum cleaner first.
2. Vacuum horizontally in each room.
3. Vacuum vertically in each room.
4. Vacuum from the furthest corner away from the door and vacuum your way out of the room.

How do you clean tight corners?

A toothbrush is the perennial tool when it comes to cleaning hard-to-reach places. Whether that’s the corners of your desk, narrow blinds, or air vents, wrapping a Swiffer duster sheet around a toothbrush is one the best ways to combat those problematic spots in your office.

How do you clean small narrow spaces?

10 tricks for cleaning super tight spaces

1. Clean your car vents with a craft brush.
2. Sink with a toothbrush.
3. Clean your keyboard with a sticky note.
4. Dust lampshades with lint roller.
5. Make cleaning slime for all your tricky spots.
6. Tongs for cleaning the blinds.
7. Use a toilet paper roll for cleaning the window sill.
8. Detail your car.

How do you clean windows that I Cannot reach?

Here are some tips:

1. Gather your equipment.
2. Spray down the window using your hose.
3. Add a couple drops of your cleaning solution to your bucket of water and dip your brush or sponge into this.
4. Using your extension pole, scrub the window with your brush/sponge.
5. Rinse the window with your hose.

How do you clean hard to reach a surface?

A solution of 1⁄3 cup white vinegar and ½ gallon warm water is a safe bet for most surfaces, except tile and stone. After the floor is completely dry, plug in the refrigerator and slide it into place. If you’ve turned off the water, switch it back on. Try to do this twice a year.

Is there a proper way to vacuum?

To vacuum like the professionals, you need to vacuum in rows. Once you’re back to your starting place, vacuum another strip right next to the first, overlapping slightly. Keep doing this until the whole room has been vacuumed. After the entire room is done, vacuum the room going the opposite direction.

Is it better to vacuum fast or slow?

You vacuum too quickly Vacuuming slowly will allow your machine to suck up more dirt and dust, and ultimately get your rugs and carpets much cleaner. Slow vacuuming allows the brush to agitate the carpet properly and suck up the unclean bits that emerge.

How do you clean small crevices?

1. TIP 1: Use a Compressed Air. Using compressed air is probably the best way to clean all the cracks and crevices in your car.
2. TIP 2: Use a Brush Or a Toothbrush. The second way to clean cracks and crevices is to use a brush or a toothbrush.
3. TIP 3: Use a Microfiber Towel Wrapped on Popsicle Stick.
4. TIP 4: Use a Steam Cleaner.

How do you clean narrow space between stove and counter?

Wedge the knife into the gap between the stove and counter, and gently scrape any debris in your direction. Then, spray your trusty DIY kitchen countertop cleaner on a paper towel or very thin microfiber cloth. Wipe the crack or gap with the paper towel or microfiber cloth.