If you don’t like to read, you haven’t found the right book

What transmission came in a 1988 S10 Blazer?

On the first generation, for 1984–1988 model years, four-wheel drive models, called the ‘T-10 Blazer’, and ‘T-15 Jimmy’ were made….Chevrolet S-10 Blazer.

Chevrolet (S-10) Blazer / GMC (S-15) Jimmy
Transmission 4-speed automatic 5-speed NV3500 manual
Wheelbase 2-door: 100.5 in (2,553 mm) 4-door: 107 in (2,718 mm)

How much does a 1988 S10 Blazer weight?

As for its exterior dimensions, it measured 178 inches in length, 65 inches in width and 61 inches in height with a 108-inch wheelbase. Curb weight varied at a range of about 2,500 to 3,000 lbs., depending on trim and transmission.

How much does a 88 Chevy Blazer weigh?

Both were short-wheelbase trucks and available with either rear- or four-wheel drive. The K5 Blazer and Jimmy had “full convertible” removable tops until 1975….1992–1994.

Third generation
Curb weight 4,500 lb (2,000 kg)
Successor Chevrolet Tahoe

What years was the S10 made?

History of the Chevy S10 Pickup Truck There were two generations of the S10 produced for the North American market. The first-generation was in production between 1982 and 1993, while the second-generation was produced between 1994 and the last year of North American production in 2004.

How many pounds does a Chevy Blazer weigh?


Base Curb Weight (lb. / kg): 3810 / 1728 (L model with 2.5L) 3818 / 1732 (1LT trim with 2.5L) 4017 / 1822 (3.6L FWD) 4246 / 1926 (3.6L AWD)
Trailering Capacity (lb. / kg)^^: 4500 / 2041 (3.6L with avail. AWD and trailering pkg.) 1500 / 680 (2.5L FWD, 3.6L FWD)

What kind of car was the Chevy Blazer in 1988?

The following versions and sub-models of Chevrolet S-10 Blazer 4WD 3-Door were available in 1988 (4 versions, see below for more details): Chevrolet S-10 Blazer 4×4 2.8L V-6 EFi 5-speed (man. 5), model year 1988, version for North America U.S.

When did the Chevy’s 10 come out?

The S-10 was introduced in the 1980’s as one of Chevrolet’s contributions to the light pickup truck market. The first generation was produced between 1982 and 1993, while the second generation was produced between 1994 and 2004. In 2005, the S-10 was discontinued in the US and was replaced by the Chevrolet Colorado.

What kind of engine does the Chevy S-10 Blazer have?

The 2.8L V6 was dropped as an option on the S-10 Blazer and Jimmy in 1990, though it was offered as an option on the S-10 and S-15/Sonoma pickups through 1993). A 5-speed manual transmission remained standard through 1994, but only with the TBI engine.

Where was the Chevrolet S-10 Blazer pickup truck made?

Chevrolet S-10 Blazer. The S-10 Blazer and S-15 Jimmy were based on the Chevrolet S-10 and GMC S-15 pickup trucks and were manufactured in Pontiac, Michigan; Linden, New Jersey; Moraine, Ohio; Shreveport, Louisiana; Ingersoll, Ontario, Canada; Ottawa, Ontario, Canada; Oshawa, Ontario, Canada; and São Paulo, Brazil .