What kind of oil does a 2004 Jeep Grand Cherokee take?
The engine oil type used on the 2004 Jeep Grand Cherokee is SAE 10W-30 for 4.0 L engines but SAE 5W-30 can also be used. The 4.7L engine uses SAE 5W-30 but SAE 10W-30 can be used as well.
What type of oil does a Jeep Grand Cherokee take?
Table of Oil Recommended for Different Grand Cherokee Models
| Model | Engine Type | Specific Oil Type |
|---|---|---|
| 2006 | 3.7L V6 4.7L V8 5.7L V8 | 5W30 Synthetic 5W20 Synthetic |
| 2018 | 2.4L 4-Cylinder 3.2L V6 | SAE 0W-20 Synthetic |
| 2019 | 3.0L V6 3.6L V6 5.7L V8 | 5W-40 Synthetic 0W-20 Synthetic 5W-20 Synthetic |
Is 10W30 thicker than 5w30?
Is 10w30 thicker than 5w30? 10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker oil offers better lubrication of motor and engine parts.
What type of oil does a 2005 Jeep Grand Cherokee take?
The 2005 Jeep Grand Cherokee with either the 3.7L V6 engine or the 4.7L V8 engine require 5W-30 synthetic oil. The 2005 Jeep Grand Cherokee with the 5.7L V8 Hemi requires 5W-20 synthetic oil.
What type of oil does a 2003 Jeep Grand Cherokee take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (Below 0) |
|---|---|
| Capacity: | 6 quarts. (with filter)After refill check oil level. |
| Torque: | 25 ft/lbs (Oil Drain Plug) |
Whats the difference between 10w30 and 5w30?
10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil. Thicker oil offers better lubrication of motor and engine parts.
Should I use thicker oil in a high mileage engine?
High-mileage motor oil doesn’t hurt and it could prevent leaks from starting. Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.
What happens if you put 10W30 instead of 5w30?
Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.
Can I use 20w40 instead of 10w30?
20w40 is thicker at high temperatures than 10w30 It is desirable for lubrication at operating temperatures to be high. 20w40 is better than 10w30 at normal operating conditions.