What is the network management card for a UPS?
APC UPS Network Management Cards allow for secure monitoring and control of an individual APC UPS via web browser, command line interface, or SNMP. The configurable notification features keep you informed of problems as they occur.
How do I access my APC management card?
Connect to the UPS/device serial port using the correct APC configuration cable….9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.
- Apply the port settings to establish the connection.
- Press enter 3-5 times to display the username prompt.
- Use the default username and password of “apc”.
How do I reset my network management card for UPS?
Press and hold the NMC’s pinhole reset button for 20+ seconds, ensuring the NMC’s status LED is pulsing green during this time. When it changes to amber or orange, release the reset button to let the format function complete and for the NMC to complete its reboot process.
How do I upgrade my APC NMC firmware?
APC UPS – Upgrading the Firmware
- Access the APC website support area and download the lastest version of firmware to your Network Management Interface.
- Extract and start the firmware upgrade utility.
- Enter the IP address of your UPS, enter the APC username and it’s password.
How do I find my APC UPS IP address?
Start the Network Management Card Device IP Configuration Utility. Enter the full IP address range of your network and click on the button to start the search for the UPS. The system will automatically locate the IP address of your APC UPS.
How do I assign an IP address to APC UPS?
Set the menu type to Advanced. Then using the down arrow scroll to UPS IP Address Settings and press enter. From the UPS IP Address Setting menu you can change from DHCP to Manual and enter a static IP address, subnet mask, gateway, and DNS.
How do I reset my Smart UPS 3000?
APC Smart UPS – How to reset / restart
- Turn off and unplug UPS from wall.
- Press and hold the OFF button again.
- You may see a quick flash of the LED’s and you should hear an audible “”click”” from the UPS.
- Turn UPS back on.
How do you upgrade your APC in GTA Online?
The APC can be modified at a Vehicle Workshop inside a Mobile Operations Center, Avenger, or Arena Workshop.
How does an APC UPS network management card work?
Remote monitoring and control of an individual UPS by connecting it directly to the network. APC UPS Network Management Cards allow for secure monitoring and control of an individual APC UPS via web browser, command line interface, or SNMP. The configurable notification features keep you informed of problems as they occur.
What does powerchutetm do for the UPS network?
For protected servers, the included PowerChuteTM Network Shutdown software provides graceful, unattended shutdown in the event of an extended power outage, always keeping business information safe. Remote monitoring and control of an individual UPS by connecting it directly to the network.
Do you need NMC for UPS SMX / SMT?
The embedded NMC within the UPS must be used to monitor any power distribution. SMX/SMT require sumx APP v5.0.3 or higher. *Note: This add-on option is only able to monitor the UPS, and not any power distribution. The embedded NMC within the UPS must be used to monitor any power distribution.