If you don’t like to read, you haven’t found the right book

What is desorption hysteresis?

The hysteresis between the adsorption isotherm and desorption isotherm is thought to be caused by the gradual desorption mechanism (percolation theory) due to the different size pores being combined. Microtrac MRB offers a wide range of instruments for Gas Adsorption Measurement.

What is hysteresis loss in transformer?

Hysteresis loss in a transformer occurs due to magnetization saturation in the core of the transformer. Magnetic materials in the core will eventually become magnetically saturated when they are placed in a strong magnetic field, such as the magnetic field generated by an AC current.

What is a hysteresis loop in catalytic adsorption?

In materials containing a portion of mesopores, a hysteresis loop is frequently observed , i.e. where the adsorbent loading and regeneration follow different paths in the adsorbed phase concentration versus partial pressure space. An example of such a hysteresis loop is illustrated in Figure 1.

How many types of hysteresis are there?

Hysteresis loops are classified into four types. These types were given the designation of H1–H4 by an IUPAC committee [5].

What is the reason of hysteresis loss?

Hysteresis losses are due to the magnetic agitation of the molecules in the iron and their resistance to being moved. One theory of magnetism is that in a magnetic material, each molecule has a north and south pole.

What is hysteresis loss and eddy current loss?

The loss which occurs because of the eddy current is known as the eddy current loss. The eddy current induces because of the interaction of the variable magnetic field and conductor. The loss which occurs because of the reversal of the magnetising force is known as the hysteresis loss.

What causes elastic hysteresis?

Elastic Hysteresis is the difference between the strain energy required to generate a given stress in a material, and the material’s elastic energy at that stress. This energy is dissipated as internal friction (heat) in a material during one cycle of testing (loading and unloading).

What is a Type 1 isotherm?

Type I isotherms are observed for the adsorption of gases on microporous soilds whose pore sizes are not much larger than the molecular diameter of the adsorbate. Complete filling of these narrow pores corresponds to the completion of a molecular monolayer.