Is Worx shocks still in business?
Worx Shocks. In 1973 Works Performance was started and created by my Dad, Gil Vaillancourt. In 2015 he passed away, and Works Performance closed down in 2017. In 2017 Worx Shocks opened its doors and is run by Gil Vaillancourt’s daughter using the same revolutionary damping system.
How does a Softail shock work?
Softail models feature adjustable rear shock absorbers located beneath the motorcycle. Positioned horizontally under the motorcycle, the shock is mounted to the frame in the front of the bike and to the swing arm in the rear. As the shock compresses, the bike gets taller. As the shock extends, the bike stands lower.
Is work performance out of business?
About Works Performance Products. In 1973 Works Performance was started and created by my Dad, Gil Vaillancourt. In 2015 he passed away, and Works Performance closed down in 2017.
How do I know if my rear shock absorbers are bad on my motorcycle?
Another way to tell if your shock is gone: The bike will “bottom” hard on modest bumps, like not-so-bad railroad tracks. If it passes this test (assuming the preload is adjusted “up”) it is not shot.
How much air should be in Harley rear shocks?
Low profile rear suspension recommended air pressures: FLHX (STREET GLIDE)
| Shock Load | Total Weight | Pressure |
|---|---|---|
| Rider with passenger weight of | up to 150 lbs (0-68 kg) | 20-30 psi (138-207 kPa) |
| Rider with passenger weight of | over 150 lbs (over 68 kg) | 25-35 psi (172-241 kPa) |
| Maximum GVWR | See Label | 40-50 psi (276-345 kPa) |
How do you make shocks stiffer?
One can get oil-based shock absorbers filled with higher viscosity oil (thick oil) that make the ride quite stiff. Or you could get new gas filled shock absorbers that also provide a slightly stiffer ride. There are race / rally based shock absorbing systems that will make the ride stiffer as well.
Which is the best aftermarket suspension for Harley Davidson?
Öhlins aftermarket suspension products designed for Harley-Davidson deliver dramatic handling improvement over the stock suspension. With a turn of a dial, you control whether you want a plush, compliant ride for long stretches of open road, or a firmer suspension for hugging mountain corners and curves.
Who is the owner of WORX Motorcycle shocks?
In 2017 Worx Shocks opened its doors and is run by Gil Vaillancourt’s daughter using the same revolutionary damping system. This same winning tradition goes into every Worx Shocks shock absorber whether it’s for off-road motorcycles, ATVs, high-performance street bikes or custom cruisers.
Are there any shocks that are one size fits all?
Each Worx Shocks shock absorber is built to order based on rider weight, specific length requirements, chassis geometry and intended use. No “One Size Fits All” shocks.
How are Worx shock absorbers built to order?
Each Worx Shocks shock absorber is built to order based on rider weight, specific length requirements, chassis geometry and intended use. No “One Size Fits All” shocks. For more than three decades, that’s been the Worx Shocks philosophy: shocks custom built-to-order.