How to configure d-Link DWL-3200AP?

Your computer will need to be in the same IPaddress range as the DWL-3200AP for configuration. The default IPaddress is 192.168. 0.50. Step 2: Open a web browser and enter in the IPaddress of the access point (http://192.168.0.50).

How do I factory reset my DWL-3200AP?

How do I reset my DWL-3200AP back to factory defaults?

1. Step 1 Locate the reset pinhole on the back of theunit.
2. Step 2 With the router powered on, press and holdthe Reset button.
3. Step 3 Hold the Reset button for about 10seconds.
4. Step 4 Release the Reset button.
5. Step 5 The device is now at factory defaults.

How do I find the IP address of my Dlink router?

To access your router’s configuration screen, you need to type your device’s IP address — for D-Link routers, this is most often found within your device’s manual or printed on the underside of the router — into your Web browser’s address bar. That’s it.

How do I access D-Link AP?

How to change a D-Link router to AP mode

1. Connect a computer to the D-link router and launch a web browser.
2. Visit the following router configuration page: http://192.168.0.1.
3. You are prompted to enter a username and password.
4. Click Setup > Local Network.
5. Set the DHCP Mode to Off.
6. Click Apply Changes.

How do I reset my Dlink wireless access point?

How do I reset my router to factory default settings?

1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
2. Step 2: Hold the paper clip down for 10 seconds and release.
3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
4. Note:

What is the default IP address of D-Link wireless router?

192.168.0.1
IP address of the router, default is 192.168. 0.1.

How do I set my router to default settings?

How to Reset Router From Configuration Page

1. Type your router’s IP address into any web browser’s search field.
2. Enter your username and password when prompted.
3. Go to System or System Tools.
4. Look for Restore or Factory Default.
5. Click Restore or Reset and OK to confirm.
6. Wait for the router to reboot.

What’s the IP address for Dlink dwl-3200ap router?

Ip Address: 192.168.0.50 Login to the router with the default IP addresse 192.168.0.50 and then use the username / password: admin / blank To login with the modem Dlink DWL-3200AP you will need to use the following default username and password: admin/blank

How do I connect my dwl-3200ap to my computer?

Step 1: Connect the DWL-3200AP to your PC using anEthernet cable. Your computer will need to be in the same IPaddress range as the DWL-3200AP for configuration. The default IPaddress is 192.168.0.50. Step 2: Open a web browser and enter in the IPaddress of the access point (http://192.168.0.50).

Do you need MAC address for dwl-3200ap bridge?

You will need the MAC address of the remote AP to configure yourwireless bridge. Step 1: Connect the DWL-3200AP to your PC using anEthernet cable. Your computer will need to be in the same IPaddress range as the DWL-3200AP for configuration.

How to access the D-Link Wap with any internet browser?

Access the D-Link WAP with any internet browser you wish using the IP address that you have just set on the device. The default user name is admin ( all lowercase) and the password is left blank. 9. Click on the Wireless Tab situated on the left hand side menu.