How do you take apart a BlackVue dash cam?

Remarks: Remove the power cable jack from BlackVue dashcam Remove the coaxial or video cable (if you have a two channels dashcam)

1. Press the LOCK button on the mount holder to release the lock.
2. Pull out the dashcam from the mount holder.
3. You can find the label for serial and model number.

How do you reset BlackVue dash cam?

How to reset your camera (factory default)

1. Connect your microSD card to the computer.
2. Open up the BlackVue PC Player.
3. Enter the settings section.
4. You will have an option to go through 3/4 tabs.
5. Select the “reset” option at the bottom, and scroll through each tab selecting reset each time.

How do I turn on my BlackVue camera?

Description:

1. Turn on the dashcam’s Wi-Fi by pressing the Wi-Fi button.
2. Go to your smartphone’s Settings then select Wi-Fi, and turn on the Wi-Fi.
3. Choose your BlackVue dashcam from the network list.
4. Enter the password (the default password ‘blackvue’) and tap Join / Connect.
5. Open the BlackVue app -> Select BLACKVUE WI-FI.

Which BlackVue is best?

DR900X Series – Best Image Quality DR900X Series, available in single and dual-channel versions, is the BlackVue flagship dashcam series. You can capture everything in crystal clear 4K UHD image quality (front camera) at a wide 162-degree view angle.

Where is BlackVue made?

Korea
Manufacturing. Pittasoft has its own factory in Korea using high-quality components and employing highly skilled engineers. The manufacturing team deeply integrates software and hardware with remarkable design.

How do I reset BlackVue DR650S 2ch?

Change/Reset via BlackVue Cloud App (Cloud-Compatible DR650GW, DR650S, DR750S/X, DR900S/X Series)

1. Login to the BlackVue app.
2. Select Connect to Cloud.
3. Tap next to your camera name and select Settings > Firmware > Wi-Fi > Login credentials.
4. Go back to the Firmware settings menu, tap < and tap Save.

How do I reset BlackVue WiFi?

Press and hold the Wi-Fi button for about 5 seconds until the beep. 3. After the voice prompt, press the button once to reset the Wi-Fi credentials to default (unique password).

Why has my BlackVue stopped working?

If your BlackVue dash cam doesn’t power on when you start the car, you may want to try: Unplug and re-plug all the cables carefully. If the dash cam is hardwired using Power Magic Pro, check the power connections, fuses and cut off voltage/time settings.

Why has my dash cam stopped working?

If you have a faulty SD card, your dash cam might see that as an error and won’t turn on. If your dash cam isn’t turning on in this mode, charge the battery or check that it’s still working. Dash cam batteries only last about 72 hours without a charge and you’ll need to replace batteries every few years.

When did pittasoft blackvue dr550gw-2ch come out?

The Pittasoft BlackVue DR550GW-2CH is a new dual channel dash cam with WiFi capabilities that was released in mid 2013. This is the first dual lens camera manufactured by Pittasoft. The front camera records at 1080p, 30fps at a low bit rate of 6 Mbps. The rear camera records at 720p, 30fps at an extremely low bit rate of 2 Mbps.

What’s the viewing angle on the blackvue dr550gw-2ch?

The DR550GW-2CH has a viewing angle of 137° for the front and 139° for the rear. Russian owners are currently developing a custom firmware to address some of the issues with this camera such as low bit rate and the ability to use micro SD cards larger than 32GB.

When did the pittasoft blackvue dash cam come out?

The Pittasoft BlackVue DR550GW-2CH is a new dual channel dash cam with WiFi capabilities that was released in mid 2013. This is the first dual lens camera manufactured by Pittasoft.