How do you clean the filter on a Fisher and Paykel washing machine top loader?

To Clean the Filter:

1. Turn the power off and unplug the machine.
2. Use a coin to open the filter cover.
3. Unhook the pump outlet hose and pull it out (about 150mm).
4. After the draining process is complete, replace the plug into the hose and refit the hose back into the housing.
5. Remove the filter by turning anti-clockwise.

How do you drain a Fisher and Paykel washing machine?

How to Drain a Top-Loading Washing Machine

1. STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
2. STEP 2: Locate the drain hose and water supply hoses.
3. STEP 3: Drain the washing machine of water.
4. STEP 4: Remove a drain hose clog.
5. STEP 5: Remove a drain pump clog.

What is the fault code for the Fisher and Paykel washing machine?

Check for water leaks out of the drum. Fisher and Paykel Washing Machine Fault 37 – Drain Pump Fault Problem: This is one of the most common Fisher and Paykel washing machine fault codes. Fault 37 appears when the water has not drained from the drum.

When does fault 37 appear on a Fisher top loader?

Fault 37 appears when the water has not drained from the drum. Solution: 1. Check for blockages and foreign objects in drain pump. 2. Replace drain pump. agitating. The water level must have been greater than empty for the machine to enter the agitate mode initially.

What’s the customer care number for Fisher and Paykel?

Their Customer Care line is 1300 650 590. Otherwise if anybody has had any similar issues that can assist you with the ones you have mentioned above, you can also try those. 🙂

Where is the pump on Fisher and Paykel intuitive?

Pump is located under front right hand corner of bowl. Empty as much water out by hand then tip machine back against wall. Sometimes just spinning the pump fan by hand a few times will dislodge the blockage and you will feel it come free. Then stand machine up & advance to final spin & press start.