How do I setup a Linksys Dual Band router?

Click the Wireless tab.

1. Under the Basic Wireless Settings sub-tab, select Manual.
2. NOTE: Select either the 2.4 GHz or 5 GHz band.
3. For the Linksys Wi-Fi Routers, you may enable either the 2.4 GHz or 5 GHz band, or both by setting the Network Mode to your desired standard (i.e. Mixed, Wireless-N Only, etc.).

How do I connect my Linksys Extender to my WiFi?

Plug your Linksys range extender into a power socket and turn it on. Insert one end of the Ethernet cable into your Linksys extender while another end to the router. Connect your computer to an active WiFi connection. Launch an internet browser of your choice.

How do I add a wireless printer to my Linksys router?

1. Launch Linksys Connect.
2. In the Computers and other devices screen, select Printer.
3. Select Wireless Printer.
4. On the Connecting a wireless printer screen, you will find the wireless settings of your router.
5. Go to your printer and enter the wireless settings that Linksys Connect displayed on your computer.

What is the best channel for 5ghz WiFi?

When using 5 GHz, it is recommended to use at least 40 MHz channel width, as some client devices may not prefer 5 GHz unless it offers a greater channel width than 2.4 GHz….If using 40 MHz channel width, the bandwidth of the following channel is used:

• 36 – 40.
• 44 – 48.
• 149 – 153.
• 157 – 161.

Can you connect a printer to a router?

To connect a printer to a wired router you will need to connect an Ethernet cable from the back of the router to your printer. After connecting the printer to the router, it will appear as a networked device in your local network.

How do I use my router as a print server?

Connect the Printer to a Router

1. Connect the Printer to a Router.
2. Connect one end of the Ethernet cable to the port found on the printer and then connect the other end of the cable to an available port on your router.
3. Turn on the Printer.
4. Press the power button to turn on the printer.
5. Print a Configuration Page.

What do I need to set up my Linksys router?

All Linksys routers have built-in web-based setup pages that allow the user to customize settings and set up advanced properties. NOTE: Before accessing the router’s web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or 4 ).

How do you set up a Linksys range extender?

Step 1: Plug the Linksys RE6350 into a power outlet and wait for the light indicator to turn orange. NOTE: Plug the range extender into a power outlet halfway between your router and the dead zone. Step 2: Connect to the range extender’s default Wi-Fi name, Linksys Extender Setup, using a wireless computer or a tablet.

Is the Linksys re6350 AC1200 WiFi range extender made easy?

Setting up the Linksys RE6350 AC1200 Wi-Fi Range Extender is made fast and easy because of its CD-less setup. Now you can run the setup from a web browser even if your device does not initially have an internet connection and is on factory settings.

Where can I download firmware for my Linksys router?

If you want to download the firmware or driver for your Linksys device, go to the Linksys Support Site and search for your device’s product page. For instructions, click here. Go to the Linksys Support Site. Enter the model number of your product in the Search field and click on it.