BookRiff

If you don’t like to read, you haven’t found the right book

How do I reset my USB Commander 3?

To reset the throttle position click on “Power Commander Tools” and then select “Set Throttle Position. To reset both the closed and open throttle positions, first make sure that the bike is communicating to the computer, then click on “Reset”. Twist the throttle wide open and release. Now click OK.

How do you change the buttons on Power Commander 3?

To adjust the buttons on your Power Commander III, follow the instructions below: With the ignition off, hold down all three buttons on the Power Commander III unit. While still holding down the buttons, turn on the ignition and start the bike. Release the buttons.

How do I reset my PC3?

a) Hold down the EXIT button while turning the power on. Instead of booting normally, you’ll see, “PC3 Boot Loader” across the top of the screen. b) Using the soft buttons below the screen, select RESET.

How do I connect my power commander 3 to my computer?

Hassle free USB communication The Power Commander USB will instantly and automatically connect to the Power Commander Control Center software once it is installed. Simply “power up” the unit and connect the supplied USB cable to the computer and PCIII USB.

How does the power Commander 3 USB work?

The Power Commander III USB allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows based computer or by using the face plate mounted button adjusters. No permanent changes are made to the bike’s system.

How do you adjust the power commander on a bike?

Hold down all three buttons on the face of the Power Commander unit and turn on the bike’s ignition. Release all the buttons once the engine is idling normally. The Power Commander manual recommends waiting approximately 20 seconds before making any adjustments. Note the position of the indicator light on the “Fuel Richness Gauge.”.

What are the buttons on the power commander?

The three buttons along the bottom of the Power Commander represent the “High,” “Mid” and “Low” areas of your engine’s rpm range. As you press each button, the Fuel Richness Gauge will display a quantity for each of the three areas.

How does mult function work on power commander?

In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM. It is also possible to alter the timing for each cylinder individually if necessary. The Mult-Function Hub allows users to access advanced expansion features.