Do you mix hardener with base coat?

You don’t have to use hardener in your base, but its better for adhesion purposes. The clear will bond to the base a lot better. Most company’s say to use 1oz per sprayable quart of the same hardener that you use in your clear.

How do you mix a basecoat solvent?

Mixing ratio: 4 parts primer 1 part 2k hardener then add 10% – 15% 2K Thinners to total volume mix, this can vary depending on spray gun set up (STIR WELL). Only mix the amount of material you intend to use in one application. Apply a cover coat and leave for 10-15 minutes depending on weather conditions.

How do you mix Sherwin Williams auto paint?

Regardless of size, the chosen measurement must remain the same throughout the mixing process. A mixing ratio given as 4:2:1 normally means 4 parts of base product, 2 parts thinner/reducer, and 1 part hardener. However, some paint manufactures add hardener second, and thinner/reducer last.

Is Sherwin Williams Automotive Paint good?

Sherwin Williams is very good paint, We have used it for over 30 years. Their urethane clear is very expensive but one of the best I’ve ever used. Price is high but you get what you pay for when it comes to paint.

Does 2k base coat need hardener?

With the base coat system, the base coat requires no hardener(only thinner) and really just provides your colour, so 3 coats may not be needed.

Should I use activator base coat?

Just about any clearcoat activator can be used in just about any base. It’s not a critical thing since the ratio is normally 3-5%. The purpose of the isocyanate addition to basecoat is adhesion. It’s not cross-linking anything in this application.

What is the mixing ratio for base coat?

Base coat mixing is always a 50/50 mixture.

How do you mix Auto base paint?

Base Coat

1. Inspect the pre-marked mixing container for any dust and debris. Wipe it out if necessary.
2. After you find the 1:1 ratio markers, pour in the paint.
3. Using a stirrer, mix the paint to blend the pigments fully.
4. Using the 1:1 ratio markers, pour in the thinner.
5. Mix the paint and thinner together.
6. Done!

Can you get automotive paint from Sherwin Williams?

Sherwin-Williams Automotive Finishes, a division of The Sherwin-Williams Company, manufactures and distributes a complete line of advanced technology paint and coating systems for automotive and commercial refinishing industries.