BookRiff

If you don’t like to read, you haven’t found the right book

Are Payne air conditioners any good?

The 13 and 14 SEER models by Payne are reliable, and great for consumers on a budget. With a sturdy design, these air conditioners deliver performance longevity as well as optimum cooling comfort.

How do I know what tonnage my Payne AC is?

For Payne, you should look for two numbers towards the end of the model number that are divisible by 6 or 12, and represent the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 36 divided by 12 equals 3, so the data plate below indicates the system is 3 tons.

Which is better carrier or Payne?

Although Payne has a higher repair rate(less than 1% higher than Carrier), the half pricing of Carrier is still a good deal. Of course, if you don’t care so much about the price and only focus on high-quality unit and service, Carrier is a good option.

How old is my Payne unit?

The date of production/manufacture or age of Payne® HVAC equipment can be determined from the serial number located on the data plate.

How long should a Payne air conditioner last?

Usually, they are replaced when the heat exchanger starts leaking. Air conditioners – Most air conditioners will last 15 to 20 years, though some may last closer to 10.

What size AC unit do I need for a 2700 square foot house?

We need to convert BTU to tonnage. 1 ton equals 12,000 BTU. That means that, on average, we will need 0.0016 tons per square foot….Tonnage Table.

Area (Square Feet): BTU Tonnage
2,400 sq ft 48,000 BTU 4 Tons
2,700 sq ft 54,000 BTU 4.5 Tons
3,000 sq ft 60,000 BTU 5 Tons
3,300 sq ft 66,000 BTU 5.5 Tons

Who is Payne made by?

United Technologies Corporation
Founded in 1914, Payne is a heating and cooling brand that manufactures air conditioners, heat pumps, and gas furnaces. Like Bryant, Payne is a part of United Technologies Corporation since the company acquired Carrier in 1979.

Who makes Payne equipment?

United Technologies Corporation’s
Payne Manufacturer Overview Payne Heating & Cooling makes central air conditioners, gas furnaces and heat pumps. Payne is a part of United Technologies Corporation’s Building and Industrial Systems division. UTC had net sales of $59.8 billion in 2017.

How do I date my Payne air conditioner?

How can I tell the age of a Payne air conditioner or heat pump from the serial number? The third and fourth numbers in the serial number on the data plate are the year of manufacture for Payne, so the one shown below is from 2008. This format has been used from the mid-1980s to the present.

What kind of air conditioner is Payne pa13?

The Payne PA13 is a discontinued air conditioner with a cooling efficiency of up to 13 SEER. The unit had a single-stage compressor which was protected by internal pressure relief valves and a terminal plug. The steel cabinet featured a galvanized coating and a zinc phosphate finish which resisted corrosion.

What are the features of a Payne air conditioner base Pan?

The base pan is designed for easy removal of water, dirt, and leaves. Each compressor is protected with internal temperature and current-sensitive overloads. An internal pressure relief valve provides high pressure protection to the refrigerant system. For improved serviceability, all models are equipped with a compressor terminal plug.

How to find a part for a Payne central air condensing unit?

Just enter the full model number of your Payne central air condensing unit in our website’s search bar for a complete list of related parts, then use the part category and part title filters to narrow the search to find the exact part you want.

Why did my Payne central air conditioner fail?

We had Payne PA13NR048-J unit installed less than 2 years ago. In such a short time the unit failed because the coil developed a leak and the Freon leaked out. This unit uses the older kind of Freon which costs $900 to refill.