How do I reset my Lexmark printer pin?

Power the MFP off. Press and hold the OK button on the printer control panel. Power the MFP on, and keep the OK button held down until you see Ready on the display. The password is now reset to the default of 00000.

How do I find my Lexmark printer pin?

Select the “Pin Method” menu option from the printer’s operator panel and take note of the eight-digit PIN. See the button path above for PIN menu option. Open the router’s configuration utility or web configuration utility. Locate and open the equivalent “PIN” setting, and enter the eight-digit PIN.

How do I reset my Lexmark printer to factory settings?

9.21.5. How to reset to factory settings on Lexmark printers

1. Open the printer’s web page and Sign in as Administrator.
2. On the menu select Settings.
3. Select Device.
4. Select Restore Factory Defaults.
5. Select Restore all settings.
6. Select Start.
7. Select Start.
8. Set date and time.

How do I set a pin on my printer?

How to Set-up PIN to Print

1. Open “Devices and Printers” from the Start menu, right click on the printer and select “Printer properties.”
2. In the Printer Properties window, under the “General” tab click the “Preferences…” button.
3. Under the “Job Storage” tab, select “Personal Job” under Job Storage Mode.

How do I log into my Lexmark printer?

Open a Web browser, and then type the printer IP address in the address field. Press Enter….Accessing the Embedded Web Server

1. From the printer control panel home screen.
2. From the TCP/IP section in the Network/Ports menu.
3. By printing a network setup page or menu settings page, and then finding the TCP/IP section.

How do I clear the memory on my Lexmark printer?

Erasing printer memory

1. From the home screen, touch Settings > Device > Maintenance > Out of Service Erase.
2. Select the Sanitize all information on nonvolatile memory check box, and then touch ERASE.
3. Follow the instructions on the display.

How do I clear the memory on a Lexmark printer?

Where do I find the WPS PIN for my printer?

The WPS PIN is displayed on the LED screen of the printer when you trying to wirelessly connect your computer to it. This has nothing to do with your router. If your computer has located your network printer, then it will ask you for a WPS PIN. Just look for the generated PIN on your printer screen.

Do you reset the counter on a Lexmark E460 laser printer?

Whenever you replace the photoconductor (PC) kit in a Lexmark E460 laser printer, you must reset the counter. Otherwise, your printer will continue to show a “replace PC kit” error and you won’t be able to print. Here’s how you do it:

How many toner inputs does Lexmark e462dtn have?

The Lexmark E462dtn is ultra-compact, yet provides the largest standard input capacity and toner capacity in the E460 Series. With two 250-sheet paper inputs plus a 50-sheet multipurpose feeder, you’ll have plenty of paper for your busiest workdays. Ethernet, USB or parallel cable not included.

How to reset the PC CNT on a Lexmark?

When CONFIG MENU is displayed, let go of the buttons. Press the button until the checkmark is in front of Reset PC Cnt. Press once, then press again to confirm the reset. The printer should briefly display the message ” Resetting PC Counter ” and return to the main menu.

How to reset the photoconductor page [ Lexmark guide ]?

With the front cover open, press and hold the stop/cancel () button. Watch the LCD screen. When you see the message ” Resetting PC Counter “, let go of the button. Close the front cover. NOTE: If you wish to confirm that the photoconductor page count has reset, print a menu settings page.