How do you reset change drum soon on brother?

To reset the drum counter follow these steps:

1. Open the front cover.
2. Press the CLEAR key.
3. Press 1 to reset.
4. Close the front cover, pressing firmly on each side until they click into place.

Why does my Brother printer keep telling me to replace the drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

What does it mean when the fax machine says change drum soon?

The message Change Drum Soon indicates the drum unit will need to be replaced soon. Even when the LCD displays the message Change Drum Soon, you can still continue to print. You can replace the drum unit when you feel the print quality is no longer acceptable.

How do you reset the drum on a Brother MFC l2710dw?

Reset the Drum Counter

1. Make sure the machine is turned on.
2. Close the front cover.
3. Press OK and the Up arrow key at the same time.
4. Press OK to select Drum.
5. Press the Up arrow key to reset the drum counter.

How do I reset my Brother MFC l2710dw drum?

How do I get my Brother printer to recognize my new drum?

Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:

1. Make sure the machine is on.
2. Close up the front cover.
3. Hold down the “OK” button and the “up” arrow at the same time.
4. Press the “OK” button to select “Drum”.
5. Select the “down” button to reset the drum counter.

How do you change the drum on a brother mfc 7360n?

How to replace the drum

1. Turn on the printer.
2. Open the front cover and let the printer sit for ten minutes so it can cool down.
3. Remove the drum unit and toner cartridge from the printer.
4. Separate the toner cartridge from the drum unit by pressing down on the green lever.
5. Open up your new drum unit.

How do you change drum on brother mfc-7220 printer?

1. Open the front toner compartment door. 2. The printer screen should read “front cover is open” 3. press the “clear” button on the printer’s front panel. 4. Printer will say “Replace Drum?” 5. Here do not press 1 but instead type in “*00″ on the keypad.

How do I reset the drum on my brother?

If your Brother machine has a numeric keypad: Press 1 to reset the drum counter. If your Brother machine doesn’t have a numeric keypad: Press the UP ARROW key to reset the drum counter.

How to reset the drum counter on a drum machine?

Make sure that the machine is turned on. Open the front cover. Press Options on the control panel. NOTE: The layout of a control panel differs depending on the model, but the Options button is located on the near side of the LCD screen as shown in illustration. Do one of the following. Press 1 to reset the drum counter.

Where is the reset drum button on a MacBook Pro?

NOTE: The layout of a control panel differs depending on the model, but the Options button is located on the near side of the LCD screen as shown in illustration. Do one of the following. Press 1 to reset the drum counter. Press the UP ARROW key to reset the drum counter. When the LCD shows Accepted, close the front cover.