What is HPE c7000?

The HPE BladeSystem C7000 is a 10u high-density enclosure that supports up to 16 half-height blade servers. The enclosure provides shared power, cooling, and networking. It also offers easy management of shared resources and the ability to quickly scale as your business needs change.

What are the supported blades in C class blade enclosure?

Storage blades provide another option besides internal disk drives or SAN connectivity. The c-Class enclosure supports two types of blade storage solutions: direct-attach storage blades and shared storage blades. For mechanical compatibility, the storage blades use the same half-height form factor as the server blades.

How do I setup my HP c7000?

HP c7000 Enclosure configuration – Insight Display

1. Navigate to Enclosure Settings.
2. Navigate to Active OA and click OK.
3. Navigate to Active IPv4 and click OK.
4. Choose proper value – static IP configuration or DHCP and click OK.
5. Interface will direct you to Accept button.
6. Now you can enter your IP address.

How do I turn off my c7000 enclosure?

Power down the enclosure

1. Use a virtual power button selection through iLO.
2. Press and release the Power On/Standby button.
3. Press and hold the Power On/Standby button for more than 4 seconds to force the server blades or workstation blades to enter standby mode.

How do I change the IP address on my HP blade iLO?

Configuring a static IP address (iLO 5 configuration utility)

1. (Optional) If user access the server remotely, user must start an iLO remote console session.
2. Restart or power ON the server.
3. Press F9 in the server POST screen.
4. Click System Configuration.
5. Click iLO 5 Configuration Utility.
6. Disable DHCP:

What is HP OneView?

HPE OneView is an integrated IT management solution that transforms compute, storage, and networking into software-defined infrastructure to automate tasks and accelerate business.

Is there a ProLiant for the HP c7000?

The C7000 is a popular solution for dense compute and performance, with ease of management and networking. The shared power supplies also reduces total power consumption, servicing constraints, and total cost of ownership (TCO). This product is for a complete C7000 with 8 HP ProLiant BL460c G8 blades.

How many ProLiant blades are in the c7000 enclosure?

The HP BladeSystem C7000 Enclosure is a 6U HP system that houses up to 16 ProLiant blades. The C7000 is a popular solution for dense compute and performance, with ease of management and networking. The shared power supplies also reduces total power consumption, servicing constraints, and total cost of ownership (TCO).

How many BL460c G7 Blades does a c7000 have?

Here is the weight of a c7000 with 16 BL460c G7 blades: Any other help for Andrey? The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise.

How to enable link loss failover in hp c7000?

If we enable this function in case Active OA loose network automatic failover to Standby OA will happen. To enable it navigate to Enclosure Settings and click Link Loss Failover. Select Enable Link Loss Failover, provide Failover Interval in seconds and lick Apply. This concludes HP c7000 Enclosure configuration.